A new generation of waterborne, acrylic emulsion pool paints which can be applied over most types of pool coatings in good condition, as well as bare concrete or plaster surfaces. WR-1000 Series pool paint can be applied to slightly damp surfaces, dries quickly for recoating, and withstands continuous submersion in fresh and salt water.
Features
Waterborne Pool Paint
Use With Fresh Or Salt Water
Dries Quickly
Lasting Color And Protection
Recommended For
Where to use: Pools, Fountains. Waterborne Pool Paint is designed for use on concrete, Marcite, and Gunite surfaces. The integrity of the Marcite or Gunite must be sound and solid. Do not use in hot tubs and spas due to high water temperatures. We do not recommend painting stainless steel, aluminum, galvanized, fiberglass, steel or vinyl lined pools with this product. WR1XXX Series is compatible over any type or previously applied pool paint.
Limitations
Apply when material, air and surface temperatures are between 50°F and 90°F (10°C to 32.2°C)
Always apply two (2) coats of paint at the recommended spread rate
Avoid painting in direct sunlight or when rain is forecast within 3 days. Do not paint if surface temperature is within 5 degrees of the dew point.
